background image

15

16

2. System Settings For Indoor Monitor

2.1 Mouse Control

Note: 1. No menus on the indoor monitor can be operated, so users should set up parameters 
               for the indoor monitor via Web browser.
           2. User can connect the device through web browser or mobile phone/tablet, and if 
               the device is connected via web browser or mobile phone/tablet, the device won’t 
               be into standby mode unless the web browser and mobile phone/tablet are both 
               logout or press the “hang up” button on the indoor monitor.  

2.1 Device Connect--

Through wired network or wireless network

A. User can connect the indoor monitor through network cable, operation steps:
1.

 Connect a network conversion with 4 pin interface to J3 on the indoor monitor, and connect

    the keystone jack of network to the end of the 4 pin interface.

2.

 Connect the outdoor camera(s) to the indoor monitor through 4 pin line(s).

3.

 Connect the power adapter to the electrical outlet of the indoor monitor and power on.

4.

 Wait for a while until hearing a beep sound, then the indoor monitor starts completely.

    

Network connection diagram through wired network of Figure 1 as an example.

B. The indoor device with WIFI function can also work in WIFI wireless network.
1. 

If user connects a network cable to the indoor device, the parameters for WIFI can be set up via 

    IE browser, please see section 

 for more information, network connection 

4.5.3.4 Network--WIFI

    diagram please refer to 

Figure 1 

on the above.

2. 

If user doesn’t want to connect a wired cable to the indoor monitor, and user needs to prepare a 

    wireless router and a smart-phone or a pad with IOS or Android system. The parameters for WIFI
    can be set up via a smart-phone or a pad with IOS or Android system, please see section

 

    

 for more information.

2.2 AP Mode 

   

Network connection diagram via wireless network as Figure 2 as an example.  

Figure 1

Figure 2

2.2 AP Mode

Internet

Reset

WAN

LAN

AC/DC power  lock 

(not Included) (not Included)

4C

3G/4G/WIFI

IOS/Android

To WAN

To LAN To LAN

Router

IP Indoor Monitor

Modem

PC

AC/DC power  lock 

(not Included) (not Included)

4C

DOOR1

DOOR2

WIFI(LAN)

IOS/Android

WIFI(LAN)

Monitoring  2

Unlock

Talk

Hang up

1
2

Monitoring

 

1

Internet

AC/DC power

 

lock

 

(not Included)

(not Included)

4C

WIFI(LAN)

IOS/Android

Reset

WAN

LAN

To WAN

AP

 m

od

e

 W

IFI

(LA

N)

WIFI(LAN)

WIFI(LAN)

1

2

3

3G

/

4G

/

WIFI

IOS/Android

IP Indoor Monitor

Modem

Router

PC

AC/DC power

 

lock 

(not Included)

(not Included)

4C

DOOR1

DOOR2

Monitoring  2

Unlock

Talk

Hang up

1
2

Monitoring

 

1

Monitoring  2

Unlock

Talk

Hang up

1

2

Monitoring

 

1

Flashing

Into AP mode  by manual

AP mode is the process of waiting for the WiFi to be set.

What

 

is

 

AP

 

Mode?

Please make the indoor monitor into AP mode by manual, press and hold the “Talk” button for 

about 5 seconds until you hear a beep sound, it will automatically reboot and wait for Power LED 

flashing then AP mode is ready. Then you can set up WIFI for it. 

Summary of Contents for MZ-IP-V739W






























Reviews: