background image

6

TMdrive-XL Series

Power Rating:

 

30 MVA, expandable to 120 MVA

Output Voltage:

 7.2 

kV

Output Frequency:

  Rated 50-60 Hz, 50 to 200 Hertz

Power Input/Output

Converter

•  AC-fed 36-pulse diode rectifier using externally 

mounted phase shifted transformer; no harmonic filter 
required to meet IEEE 519 guidelines

•  DC bus voltage:  3 x 5,450 Vdc
•  Power factor greater than 95% in speed control range

Inverter

•  Five-level inverter for motor friendly wave form
•  Uses 8 GCT devices for each of three phases
•  7.2 kV output to motor – no output transformer 

required

•  Inverter power modules water cooled
•  Conservative design for expected 20 year MTBF

Input Voltage

Any utility voltage using 
separate transformer input
50/60 Hz ±10%

Output Voltage

7,200 Vac

Output Current

2400 A rms

Output Frequency

50-60 Hz

Output Chopping

600 Hz (max)

Effi ciency

98%

Cable Entry

Top or bottom

Clean Motor Output Wave

As a result of the five-
level PWM control, the 
output current waveform 
is close to a sine wave.  
Harmonic currents in 
the motor windings are 
minimized so the heat 
loss is negligible and 
there is very little torque 
ripple on the output shaft.

Line-to-Line Voltage at 100% Speed

U-phase Current at 100% Speed

Protective Functions Include:

• Inverter overcurrent
• Inverter overvoltage
•  Low system voltage
•  Motor ground fault
• Motor overload
• Cooling fan abnormal
• Over-temperature

• CPU error
•  Water cooling alarm
• Exciter fault
•  DC voltage drop
• Motor inverse rotation
• Stall detection 
• Ground detection

Frequency Control

•  Volt/Hertz Control – standard
•  Sensorless vector control – optional
•  Power factor control for synchronous motors

Output Voltage  Modulation

The output switching modulation strategy is dynamically 
adjusted based on three speed zones to minimize motor 
torque pulsation.

Drive Inputs

•  LAN Interface Options:  Profibus-DP, DeviceNet, 

Modbus RTU, TOSLINE

•  Input/Output:  6 Analog I/O, 8 Digital I/O

Power Circuits

Motor Control

Gate Commutated Thyristor 
(GCT) with driver board.   
Rated 6,000 Volts, 6,000 
Amps - the world’s largest 
switching device

TMdrive-XL85 – 30 MVA Frame

Dimensions

Width 8.1 m

 

 

 

Height:  2.6 m

Motor type:

 

Synchronous or Induction

drive-XL85 – 30 MVA Frame

XLdrive Series Family Application Guide.indd   6

10/3/2011   3:16:12 PM

Summary of Contents for TMdrive-XL Series









Reviews: