12
manual rEsEt - rEstoring factorY sEttings
1. Switch on the REEF-Cam WiFi hub (10).
2. After 20 seconds, press and hold the RESET button on the WiFi hub (10) for 5 seconds
3. The REEF-Cam will omit 3 beeps to indicate that it has been restored to factory settings.
clEaning and maintEnancE
caution:
To avoid possible electric shock, special care should be taken when using any
electrical appliance near water.
caution:
Always isolate from the mains electricity before installing or carrying out any
maintenance to the REEF-Cam or REEF-Cam WiFi hub.
please note:
For optimum camera picture quality ensure the water clarity in your aquarium
is maintained at an optimum level at all times and the REEF-Cam lens is clean and free of algae
or detritus. Factors such as feeding, algal blooms, aquarium treatments, aquarium maintenance
and water turbidity will have a direct effect on the quality and clarity of the REEF-Cam picture.
1. Using a soft cloth, regularly clean the REEF-Cam lens to ensure it is clean and free of algae
and detritus at all times. Failure to do so will have a direct effect on the quality of picture
achieved.
please note:
Only clean the REEF-Cam lens with a soft, clean cloth, NEVER with an algae
pad or scraper or any other abrasive material that could scratch or damage the lens.
k)
REEF-Cam instructions v1-2016_Layout 1 11/08/2016 11:23 Page 12
