TM RACING 250Fi MX, Use And Maintenance Manual

Page: 13 / 104

4 S T R O K E S 4 S T R O K E S
13
4 S T R O K E S 4 S T R O K E S
ACCOSSATO RADIAL PUMP FRONT BRAKE LEVER (SMX)
The radial Accossato front brake pump (1) is located on the right side of the
handlebar. The front brake lever (2) activates the front wheel brake. The
position of the front brake lever compared to the grip can vary according to
the rider’s preference. See chapter 4.2 “Chassis Maintenance” (page 56).
THROTTLE
The throttle control (1) is located on the right side of the handlebar. To
increase the power supplied by the motor (accelerate), rotate the grip
(2) towards yourself and rotate it in the opposite direction to decrease
it. Make sure the grip always has 4-5 mm of free play. See chapter 4.3
“Engine Maintenance” (page 73).
COMBINATION SWITCH (EN)
The combination switch (1) is located near the left handlebar grip.
It is very intuitive to use.
The lights are off when the rotating ring nut (2) is positioned with symbol (3)
aligned with symbol (4) on the switch. To turn on the position lights, rotate
the ring nut (2) anticlockwise until symbol (5) is aligned with symbol (4).
Do the same to turn on the low beams (6) and the high beams (7).
Press button (8) to honk the horn. Press the rocker switch (9) to the left
to activate the LH turn signal or to the right for the RH turn signal.
On the 250 EN and 450 EN models, press button (10) to switch the engine
off.
2.1 HANDLEBAR CONTROLS
2
1
2
1
7
6
4
1
9
8
5
3
2
10