TM RACING 250 EN, Workshop Manual

Page: 62 / 72

58
8
7
4
5
6
5
6
2
3
1
ENGINE DISASSEMBLY
Reassemble the rod making sure that the ratchets (7) and (8) fit correctly
into their seats; the two ratchets cannot be reversed.
Fit the ratchet support (6) on the plate (5).
Fit the plate (5) on the pin (11) by inserting the ratchet support (6) in the
ring nut (12), tighten the screws (4) with a torque of 10 Nm, (1 kgm, 7,37
ft/lb).
Mount the socket (3).
Insert the gearbox control shaft (1) with the shim (2).