TM RACING 250 EN, Workshop Manual

Page: 47 / 72

43
1
1a
1a
2
3
4
5
ENGINE DISASSEMBLY
Check the condition of the gasket (4) if damaged, replace.
Refit the pump cover (3) by tightening the screws (1) with a torque of 8Nm
(0,8 kgm, 5,9 ft/lb) by replacing the aluminum washer (2) of the screw (1a).
Refit the cap (4).
2.16.2 Water pump removal
Undo the screws (1); the screw (1a) is the system drain screw and is
equipped with an aluminum washer (2).
remove the pump cover (3).
Check the condition of the gasket (4) if damaged, replace.
remove the t ransmission cover (5) as described in the relative paragraph.