TM RACING 250 EN, Workshop Manual

Page: 61 / 72

57
16
16
17
14
14
13
14
12
20
18
19
11
ENGINE DISASSEMBLY
to remove the rod (14) unscrew the screw (16).
Reassembly
Reassemble the rod (14) by correctly positioning the spring (17) and tight -
ening the screw (16) with a torque of 10 Nm (1 kgm, 7,37 ft/lb)
Use a screwdriver (13) to move the rod (14) and fit the gear selection ring
(12) by inserting the hole (18) in the pin (19) of the drum (20).
Screw the pin (11) with a torque of 10 Nm (1 kgm, 7,37 ft/lb) + Loctite 243.