TM RACING 250 EN, Workshop Manual

Page: 35 / 72

31
16
15
17
18
19
20
21
5
19
14
ENGINE DISASSEMBLY
2.10.2 Refitting the lever (5)
Put graphite grease around the pin (20) and on the screw (19) without dirt-
ying the thread.
Put loctite 243 on the thread (21)
Recompose the lever and tighten the screw (19).
insert the spring (17) in the pin (18) and on the screw (19).
2.10.3 Reassembly of the valve (13)
reassemble the roller bearing (16) and the seal (15) with the printed side
facing out.
NOTE: If the seal (15) is damaged, replace.
Smear the socket (14) with graphite grease and reassemble it in the cylin-
der.