TM RACING 125 EN 2022, Use And Maintenance Manual

Page: 94 / 130

4•94
1 1
22
33
44
55
11
33
22
4 • MAINTENANCE
2-STROKE - EN
ADJUSTING THROTTLE CONTROL CABLES
Adjustment on models (EN - SMR)
Adjustment on these models must be performed on the throttle body.
The throttle grip must be adjusted to suit the rider, but must always have
at least 1 - 2 mm of play.
- To adjust the play, move the protective cap (1).
- First adjust the (upper) opening cable, then the (lower) closing cable.
Consult the information on the sheaths.
Opening cable
- Loosen the lock nut (2) and tighten or loosen the adjusting screw (3) to
obtain the required play.
- Tightening the adjusting screw increases play.
- Loosening the adjusting screw reduces play.
- Tighten the lock nut and check that the grip rotates smoothly.
Closing cable
- Loosen the lock nut (4) and tighten or loosen the adjusting screw (5) to
obtain the required play.
- Tightening the adjusting screw increases play.
- Loosening the adjusting screw reduces play.
- Tighten the lock nut and check that the grip rotates smoothly.
- Put the protective cap back in place at the end of adjustment.
WARNING
- With the engine running, ensure that the idle speed is correct and does
not increase when you steer all the way right or left.
Adjustment on models (MX - SMK)
Adjustment on these models must be performed on the throttle.
The throttle grip must be adjusted to suit the rider, but must always have
at least 1 - 2 mm of play.
- To adjust the play, move the protective cap (1).
- Loosen the nut (2) and work on the registry (3).
- Tightening the registry increases play.
- Loosening the registry reduces play.
- Tighten the nut (2) and check that the grip rotates smoothly.
- Put the protective cap (1) back in place at the end of adjustment.
WARNING
With the engine running, ensure that the idle speed is correct and does not
increase when you steer all the way right or left.