172-65411MA-05 (PT1) 5 Jun 2019
22
11. Deleting Existing Data
Existing data can be deleted from PT1 Memory.
PT1
has two inspection modes, “Trap&Valve” mode and “Bearing” mode. Each mode
has 100 available memory locations (records).
Note: Steam trap inspection data and valve inspection data share the same memory
locations.
1) Set the mode to the type of data to delete. If already set
to correct mode, the following operation is unnecessary.
a) With the power on, simultaneously press [
]
[ENT].
b) Press [
] or [
] to highlight the desired mode.
c) Press and hold [ENT] for more than 1 second.
2) Select a record you wish to delete by pressing [
] or [
]. If intending to delete all
data, select any record.
a) Pressing [
] / [
] once increments/decrements the record number by 1.
b) Holding [
] / [
] increments/decrements record numbers more quickly.
3) Press and hold [
]
[ENT].
4) A menu will appear with three options.
Data Clear
: Delete data at the present record number.
All Clear
: Delete all data from all records in this mode.
Cancel
: Cancel delete action and return to the normal
screen.
a) Press [
] or [
] to highlight the desired action.
b) Press [ENT]. The selected action will be implemented, then PT1 will return to
normal screen.
Mode
Trap&Valve
Bearing
001
Data Clear
All Clear
Cancel
Trap
/ Valve
