Operation Manual
30 Status
11/03
Volume control
Control the volume of the cassette drive, the CD drive and external
devices with the
TAPE/CD
button. Turn the volume control to the right
to set the maximum volume and in the same way to the left to turn the
volume down.
The mic volume controls
MIC 1
and
MIC 2
regulate the microphone
volume. Turn the volume control to the right to set the maximum
volume and in the same way to the left to turn the volume down.
The channel control
BALANCE
controls the balance between the left
and right channels for an optimal stereo effect. Turning this to the right
lowers the volume of the left channel and vice versa. Under normal
circumstances, leave the control on the middle setting.
Tone balance
The tone controls
BASS
and
TREBLE
allow a lowering or raising of the
low and high tones.
Set the tone on the
TLS devices
according to the acoustics in the
room, or as required. As soon as the maximum value has been
reached using the control
TAPE/CD,
playback distortions can occur
which could damage the loudspeaker system.
Note:
Playback distortions can damage the loudpeaker. Do not
operate the device for any length of time when distortions
occur. Lower the total volume and stop the distortion.
External Connections
MIC 1 and MIC 2
Via the
MIC 1
and
MIC 2
connections wired microphones can be
connected to the device with a 6.3 mm jack plug.
LS-OUT
The active TLS amplifier
M 100 LS PLus
can be connected via the
LS-
OUT
connection. The
LS-OUT
connection enables stereo operation.
Connect both devices before switching them on.
Audio IN
An external audio source can be connected via the Audio
IN
connection to record this onto a cassette, for example.
