TLR Drones AERO-107, Manual

Page: 20 / 41

AERO-107
Manual TLR Drones
19
Note: Understanding LED’s
Flashing
Red - Blue = Initializing, please wait / NO Flying
Flashing Yellow = Pre-Arming Waiting for GPS Lock takes 3-5 Min.
Safety Switch:
Flashing
Red = Inactive Pre-ARM, Motor Disarmed
Solid Red = Active Pre-ARM, Motor Disarmed
Step 8: After 3-5 Minutes hold down
Safety Switch for 2 seconds until the it turns Solid Red and the
LED Flashing Yellow turns Flashing Green . This indicates, GPS Locked and Autopilot ready.
Safety Switch
Step 9: ARM Motor by holding Throttle stick to Low throttle and full Right Rudder for 2 sec. After
tone, LED turns Solid
Green “Motor ARMED” . As a Quick Test: apply a small amount of Throttle, prop
will spin, then reduce throttle to low (off).
ARM Motor DISARM Motor
DN DN
Right Left
Note: To Disarm, hold Throttle stick to Low throttle and Full Left Rudder for 2 sec. LED back to
Flashing
Green , Hold Safety Switch for 2 seconds . Flashing Red = SAFE!! Motor will not spin!
To Re-ARM repeat step 8-9
Note: If you need to force ARM use Mission Planner or Tower App .