AERO-107
Manual TLR Drones
16
Preflight Procedures
Select an open area for flying, away from people and buildings, and remember to bring the flight
checklist and a fully charged battery. Follow these steps every time you fly.
Step1: Before flying, examine the
AERO-107
to ensure that all components are secured in safe flight
configuration.
Note: If any of the components or assemblies in these checks is not secure, tighten the screws or use
CA glue to secure the components to the foam.
A-» Check that the wings, tail, and all components are fully assembled and securely attached.
B-» Check that the propeller is secured tightly to the motor.
C-» Check that the servo rods are secured to the servo horns with screw connector.
Inspect Tail Servos Inspect Wing Servos
Step 2: Check that the airspeed sensor is secured to the side of the
AERO-107
and the tube is free
from obstructions. Install Airspeed Cover before connecting battery.
Install Pitot tube Cover
Airspeed Sensor
Summary of Contents for AERO-107
Page 37: ...AERO 107Manual TLR Drones 36...
