AERO-107
Manual TLR Drones
12
Propeller Installation
Step 1: Locate the rings inside the propeller package. Remove the ring with a internal
diameter that fits your motor shaft, and insert it into the back of the propeller hub.
Step 2: Remove the nut and the washer (if present) from the motor, add the propeller
with
the writing on the propeller facing towards
the nose of the plane !! add the washer and the
nut on the propeller, and tighten the nut. There can be 2 Prop mounts Collet / Stud Mount
Collet Mount ( V1) Stud Mount (V2)
Stud mount (V2)
Collet ring Ring
Nut no Washer
Nut
Washer
Assorted Rings
writing on the propeller facing towards the nose of the plane !!
Nose of the Plane
Summary of Contents for AERO-107
Page 37: ...AERO 107Manual TLR Drones 36...
