2
PRECAUTIONS
The FAT 1 Stereo Compressor requires very little installation, but like all electrical
equipment, care must be taken to ensure reliable, safe operation. The following points should
always be observed:
- All mains wiring should be installed and checked by a qualified
electrician,
- Ensure the correct operating voltage is indicated on the rear panel
before connecting to the mains supply,
- Never operate the unit with any cover removed,
- Do not expose to rain or moisture, as this may present an electric
shock hazard,
- Replace the fuse with the correct type and rating only.
Warning: This equipment must be earthed.
3
INSTALLATION
3.1
AC Mains Supply.
The compressor is fitted with an internationally approved 3 pin IEC connector. A mating
socket with power cord and mains plug is supplied. All mains wiring should be performed by
a qualified electrician with all power switched off, and the earth connection must be used.
The unit is specified for operation on nominal 230V a.c. mains only. If the power cable or
mains plug supplied with the unit is not suitable for use in your country, refer to your dealer
for a replacement.
Warning:
attempted operation on the wrong voltage setting, or with an
incorrect fuse, will invalidate the warranty.
