Technical Description of TANDBERG 8000 with software version E3/B8
D12008 Rev. 11
9
•
Horizontal resolution: 450 TV lines for PAL and 460 TV lines for NTSC.
•
Number of picture elements: 752 (h) x 582 (v) for PAL and 768 (h) x 494 (v) for NTSC.
•
Shortest Subject Distance: 10 mm (wide end) and 1000 mm (tele end)
•
At the codec’s side, the camera cable splits in two: One presents the S-video Output (for
connection to codec’s Video Input1) while the other 9-PIN D-sub connector presents power
(12V) and control signals for moving the camera.
•
The maximum length of the camera cable for main camera supported by TANDBERG is 10m
(33 ft)- may be extended up to 20 m (66 ft) when using cable with external power supply.
2.2.2
Camera Pinouts and connectors
8-PIN RJ (shielded modular jack):
This connector is used for the power and control signals to the main camera.
pin-8
+12 V (presence when
connected in daisy chain)
pin-7 GND
pin-6 GND
pin-5 RXD
(in)
pin-4 TXD
(out)
pin-3 +12V
pin-2 GND
pin-1 +12V
Standard Phono:
Used for composite video signal
Power:
2.0 mm DC power jack (+12V, 1A required)
Standard Mini Din:
Used for S-Video signal
6-PIN RJ (modular jack):
This connector is used when cascading cameras: Control (out) signal and external camera
detection. Note: It does not provide power for cascaded camera.
Pin 6
GND
Pin 5
GND
Pin 4
RXD (in)
Pin 3
TXD (out)
Pin 2
Presence (+12V in daisy chain)
Pin 1
GND
