Note: To make the dome camera tilt between a specific range, such as -10° to +100° or
-10° ~ +190°, go to the Tilt Range page to set the tilt angle range. Otherwise, the dome
camera will tilt 90° as the default setting.
The Image mode (digital image flip mode) enables users to keep tracking the objects
seamlessly. In this mode, hardly any delay occurs compared with that in the M.E. mode.
Digital zoom
With digital zoom set to On, it is possible to zoom in further on the video when the lens is fully
zoomed in using optical zoom.
Speed by zoom
When enabled, the pan/tilt speed is adjusted by an internal algorithm when zooming
automatically. The larger the zoom ratio, the lower the rotation speed.
Day/Night function
With the IR cut filter, the camera can still catch clear images at night or in low-light
conditions. In daylight, the IR cut filter blocks infrared light for good colour reproduction; at
night, the IR cut filter is removed to also use infrared light and the displayed images will be in
black and white.
● Auto
The camera decides when to remove the IR cut filter and switch to monochrome according
to the image brightness level.
● Night
The camera removes the IR-cut filter and switches to monochrome.
● Day
The IR cut filter is returned and the image is in colour. In a dark environment this gives
darker pictures because infrared light is not used. Colour reproduction will be noisy
because the camera will increase gain.
PTZ&IMAGE
93
