12
TYPICAL GRINDER APPLICATIONS
Leaving uneven joints.
Light grinding or concrete surfaces cleaning.
Remove mastics, thin-sets, high spots, epoxies and urethanes.
Trailed and stabilizers included.
Lightly texturized concrete surfaces.
Sidewalk Repairs.
Concrete Removal.
Floor Cleaning/Preparation.
Concrete texturized lines removal.
Creating non-slipping surfaces.
9. SERVICE INSTRUCTIONS
Never service or lubricate the unit engine while running.
After servicing the unit, restore and fasten all guards, shields, and covers to their
original positions.
Never drain oil into the ground, into open streams, or down sewage drains.
Keep air filter clean at all times. Wash away dust and debris using anon-oil based
cleaning solvent. Let the filter dry before re- installing.
WHEN LIFTING/LOWERING ALWAYS:
1.
Set the machine in an upright position and adjust the cutter cage to maximum
height by turning the height adjustment knob to its farthest position. (This will
ensure clearance for the rotation cage.)
2.
Stop the engine or electric motor.
3.
REMOVE GRINDING ACCESORIES.
4.
Lift the cutting guide to avoid any contact with the head.
5.
Secure any other hardware on the machine.
6.
Make sure you use appropriated lifting equipment to lift equipment.
7.
Do not position yourself where you could possibly be pinched / caught between
the equipment and some other obstacle.
TOWING
1.
Move Grinder on the jobsite by hand pushing. Do not tow the unit with another
vehicle. The grinder may be damage if towed.
Discount-Equipment.com
