9
6. BEFORE OPERATING
REMEMBER!
It is the owner´s responsibility to communicate information on the safe
use and proper operation of this unit to the operators.
Before operating, review SAFETY PRECAUTIONS listed on page 6 of this manual.
Familiarize yourself with the operation of the unit and confirm that all controls
function properly BEFORE starting engine.
Locate the killing switch and assure you know how to
STOP
the unit.
Make sure hands, feet, and clothing are at a safe distance from any moveable parts
prior to starting.
Shrouds and guards are provided to protect the operator or structures in close
proximity to rotating hot engine parts. It is the
RESPONSABILITY OF THE OPERATOR
to
see that they are properly in place.
NEVER
operate this equipment without a guard.
OIL LEVEL - Check the oil level in the engine. For more information see "Lubrication"
under the engine "Owner's Manual" the "Maintenance" section of this manual.
All
Equipment come without oil, running an engine without lubrication may damage the
engine.
AIR CLEANER - Check to ensure elements are in good condition and properly installed.
Review every decal with the OPERATOR.
FUEL SUPPLY - Engines on equipment require an automotive grade of clean, fresh,
unleaded or regular gasoline.
All
equipment’s
come without gasoline and oil
.
FUEL FILTER - Check to ensure element is in good condition... Replace if it is clogged or
damaged.
LUBRICATION POINTS
–
Grease wheels, Drive Shaft and bushing daily.
SPARK PLUG (GAS UNIT)
–
Check and clean spark plugs regularly. A fouled, dirty or
carbonated spark plug may cause difficulties starting and poor engine performance.
Set spark plug gap to recommended clearance. Refer to engine manual.
POSITION
–
The only operating position for this grinder is at the rear of the equipment.
If the operator must leave this position the engine must be shut down.
SPECTATORS
–
Keep all personnel/spectators away from the Grinder while running.
This spinning equipment can throw segments and can cause injuries.
Discount-Equipment.com
