TK JCS Operator'S Safety And Service Manual Download Page 4

 

 

 

1. SERIAL NUMBER LOCATION 

The model/serial number decal is located on the shroud assembly (black). 

 

                 (Write model number) 

 

 

            

(Write serial number) 

The unit’s year of manufacture can be determined by the serial number. Contact 

your nearest 

sales branch or              for more information. 

This  Unit  warranty  is  stated  in  this  Operational  and  Safety  manual  on  page  16.  Failure  to 
return warranty registration card renders the warranty null and void. 

An 

engine owner’s  manual is also

 attached  to every unit. Engine parts  may order from any 

authorized dealer. Refer to the engine owner´s manual lo learn about specifications and part 
identification. 

2. PARTS ORDERING PROCEDURE:

 

          Parts are available worldwide and must be ordered through your local distributor. If you 

can’t  locate  the             

distributor  in  your  area  refer  to  page  17  of  this  manual  to  locate  the           

nearest branch and contact numbers for assistance. 

            Saws are intended for use in several applications. They are powered by four stroke gas 
engines or electric motors and are available in different sizes and manufacturers. 

This Operation manual contains only standard parts. Variations of these parts as well as other 
special parts are not included. Contact your local           distributor for assistance in identifying 
parts not included in this manual.  

ALWAYS HAVE READY:

 

 

1.

 

Model and serial number of machine when ordering             parts. 

2.

 

Model and serial number of engine when ordering engine parts. 

3.

 

Item part number(S), description, and quantity. 

4.

 

Company name, address, zip code, and purchase order number. 

5.

 

Preferred method of shipping. 

Discount-Equipment.com

Summary of Contents for JCS


















Reviews: