TK JCS, Operator'S Safety And Service Manual

Page: 14 / 17

13
4. Turn set screw clockwise to remove saw rock on right front and left rear wheels.
5. Turn set screw counter clockwise to remove saw rock on left front and right rear
wheels.
6. Hold set screw in desire position and tighten jam nut.
11. MAINTENANCE SCHEDULE
1. Check all hardware after the first 5 hours of use, the follow the maintenance schedule.
2. Re-torque the Blade and collar hardware after the first 25 hours of usage, and then
follow the maintenance schedule.
Maintenance Each
use
Every
20 hours
Every
50 hours
Every
100 hours
Yearly
Engine Refer to engine operator/owner
manual
X X
Air Cleaner Refer to engine operator/owner
manual
X X
Oil Oil change
X
Bearings Grease Arbor Shaft Bearings
X X
V-Belts Check for excessive wear
X X
Arbor Recheck arbor-belt tension
X
Hardware Check and tighten 1,2
X X X
Wheels Grease wheels and check wear
X X
Discount-Equipment.com