10
7.
Pull the starter string.
8.
After the engine starts, move the choke lever to the open position, move the
throttle level to the "IDLE" position and let the engine warm-up for one or two
minutes.
SLOWLY LOWER BLADE INTO CUT
IT IS RECOMMENDED THAT SAW CUTS BE MADE BY 2” TO 3” INCREMENTS AT
A TIME. GREATER DEPTHS OF CUT DAMAGE BLADE
9.
To stop the engine, make sure to let the engine idle before stopping by using
the crank lift handle to raise the saw height.
10.
Push in the engine stop switch on the saw.
11.
Close the fuel valve.
ELECTRIC MOTOR
1.
Plug the motor into a suitable power source.
2.
Move the switch on the motor to the "ON" position.
3.
It is recommended to let the motor idle before running and stopping by using
the crank lift handle to raise the saw height.
STOP THE ENGINE OR ELECTRIC MOTOR BEFORE:
Adding fuel.
Leaving equipment unattended for any amount of time.
Making any repairs or adjustments to the unit.
Lifting/Transportation.
8. OPERATION INSTRUCTIONS
OPERATING
1.
After turning engine/motor “ON”.
2.
Lower saw blade until it just touches the pavement by turning the manual lift crank
clockwise.
3.
From this
point, each ¼ turn of the lift/lower crank equals ¼” depth of cut.
4.
Down the saw cutter guide.
5.
Slowly push saw forward to desired cutting area.
6.
Cut only in straight line.
DO NOT OPERATE THE UNIT WITH THE BLADE GUARD OPEN/DISATTACHED!
Discount-Equipment.com
