TABLE SAW
13
GB
KNOW YOUR MACHINE
Features and Controls
ON/OFF Switch
The saw can be switched on by pressing the
green pushbutton.
The red pushbutton has to be pressed to
switch off the saw.
Blade Guard
Always keep the removable blade guard down
over the saw blade for through-sawing cuts.
Bench Extension
This bench extensions give the operator
a d d i t i o n a l s u p p o r t w h e n c u t t i n g w i d e
workpiece.
Riving Knife
A removable metal piece of the blade guard
assembly, slightly thinner than the saw blade,
which helps keep the kerf open and prevent
kickback.
Bevel Locking Lever
This lever, placed just under the saw table
surface on the front of cabinet, locks the angle
setting of the blade.
Height/Bevel Adjusting Handwheel
Located on the front of the cabinet, use this
handwheel to lower and raise the blade for
height adjustments or blade replacement. This
handwheel also make the adjustment for bevel
angles easy.
Miter Gauge
The miter gauge aligns the wood for a cross
cut. The easy-to-read indicator shows the
exact angle for a miter cut.
Rip Fence
A sturdy metal fence guides the workpiece
and is secured with locking lever.
Saw Bench
ON/OFF Switch
Miter Guage
Leg
Bench Extension
Saw Blade Guard
Bevel Limitation Stopper
Bevel Adjusting Wheel
Blade
Riving Knife
Rip Fence
Height Adjusting Handlebar
Leg Support
Push Stick
Locking Lever
Bevel Indicator
65050UK00M100.indd 13
2020/5/27 9:36:16