Titan UMAP 2110, Hardware Installation And User'S Manual

Page: 50 / 62

2
—
Operating and Maintaining the UMAP 2110
MGMT- Speed
(LED B on RJ-45)
Orange
Off
100 Mbps
10 Mbps
MGMT-Link/Act
(LED A on RJ-45)
Green
Off
Green - Flash
Active
Inactive
Data Tx/Rx
Interface Description
GBE1 Gigabit Ethernet electrical trunk port 1
SFP1 Gigabit Ethernet optical trunk port 1
GBE2 Gigabit Ethernet electrical trunk port 2
SFP2 Gigabit Ethernet optical trunk port 2
MGMT Ethernet Port connected to LAN for providing system out-band
EMS/Telnet control interface, such as system monitor, control or software
upgrade.
COM RS-232 port connected to the terminal for monitoring and controlling the
system.
HK RJ-50 port for housekeeping inputs and one alarm contact output.
FAN RJ-45 port for connection with the RJ-45 port on the front panel of fan card
to provide power to the fan.
POTS RJ-21 connector (50-pin dual row header) for connecting POTS lines.
LINE RJ-21 connector (50-pin dual row header) for connecting DSL lines.
Button Description
ACO For Alarm Cut Off service.
RST An embedded hardware button for hardware resetting.
42 / 54