Titan UMAP 2110, Hardware Installation And User'S Manual

Page: 3 / 62

Mandatory Regulations
Mandatory Regulations
The following sections describe the mandatory regulations that govern the installation and operation of the
UMAP 2110.
List of Terms
Table 1 lists the terms used in this chapter.
Table 1 List of Terms
Term Expansion
CE Conformité Européenne
EEC European Economic Community
EN European Standards
FCC Federal Communications Commission
IEC International Electrotechnical Commission
General Requirements
The sections that follow outline the mandatory regulations that govern the installation and operation
of the UMAP 2110. You must adhere to these instructions so that your system meets regulatory
requirements.
Danger 1 – When removing cards from a chassis under power, some of the components
such as the DC converters may be extremely hot. Handle by the card guides only.
Warning1 – This unit contains no user-serviceable parts. Refer servicing to qualified
personnel.
Warning 2 – To prevent accidental electrical short circuits, align the card correctly
between the card guides before you insert it in the slot.
Prevention of Access
The UMAP 2110 must be accessible only to authorized personnel. Install this apparatus in a
restricted access location or similar environment to prevent unauthorized access.
EMC Compliance
EMC compliance may require the use of ferrites, shielded cables or other special accessories. Where
required, these special accessories must be installed as per the instructions.
I