10.8V DRILL DRIVER TTP451DDH
MAINTENANCE
Remove the battery from the tool and the plug
from the socket before carrying out any
adjustment, servicing or maintenance.
Your power tool requires no additional lubrication or
maintenance. There are no user serviceable parts in your
power tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always store
your power tool in a dry place. Keep the motor ventilation
slots clean. Keep all working controls free of dust.
Occasionally you may see sparks through the ventilation
slots. This is normal.
If the supply cord of the charger is damaged, it must be
replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice. For further
information visit www.recyclemore.co.uk
DISPOSAL OF AN EXHAUSTED
BATTERY PACK
To preserve natural resources, please recycle or dispose of
the battery pack properly. This battery pack contains Li-Ion
batteries. Consult your local waste authority for information
regarding available recycling and/ or disposal options.
Discharge your battery pack by operating your drill, then
remove the battery pack from the drill housing and cover
the battery pack connections with heavy duty adhesive tape
to prevent short circuit and energy discharge.
Do not attempt to open or remove any of the components.
