TTI884COM
Getting
started...
Before you start
EN
21
You will need
(items not supplied)
Suitable drill bits
Suitable driver bits
Bit holder
Cooling lubricant (for drilling into metal)
(items supplied)
Battery pack (10)
Charger (13)
NOTE:
The accessories required depend on the intended application.
Ask your dealer for advice.
Setup
WARNING!
The product must be fully assembled before operation!
Do not use a product that is only partly assembled or assembled with
damaged parts!
Follow the assembly instructions step-by-step and use the pictures
provided as a visual guide to easily assemble the product!
Do not insert the battery before it is completely assembled!
Inserting
1. Turn the chuck sleeve (2) anticlockwise until the chuck jaws (1) are opened
wide enough to insert the drill bit (Fig. 1).
2. Insert the drill bit all the way to the stop (Fig. 2). For smaller drill bits ensure
a bit holder.
3. Turn the chuck sleeve (2) clockwise until the drill bit is properly fastened in
the chuck jaws (1) (Fig. 3).
1
2
Fig. 1
Fig. 2
2
Fig. 3
WARNING!
After short operation, switch the product off and check
once again that the bit is properly fastened!
Caution, the bit could be hot!
MNL_18V 2X 2AH Li-ION BRUSHED COMBI DRILL_V2_211220.indd 21
12/20/21 11:39 AM
