EN
25
In
more
detail...
TTI884COM
EN
Product functions
Intended use
This product is intended for drilling in wood and similar materials e.g. MDF,
plywood etc., plastic, metal and impact drilling in brick, tile and concrete, as
well as for screw driving. It should not be used for working on materials that are
dangerous to health.
operation and to observe all the instructions therein.
This product is intended for private domestic use only, not for any commercial
trade use. It must not be used for any purposes other than those described.
General operation
1. Check the product, its battery pack and charger as well as accessories for
damage before each use. Do not use the product if it is damaged or shows
wear.
2.
3. Always hold the product by its handle (8). Keep the handle dry to ensure safe
support.
4. Ensure that the air vents are always unobstructed and clear. Clean them if
necessary with a soft brush. Blocked air vents may lead to overheating and
damage the product.
5. Switch the product off immediately if you are disturbed while working by other
people entering the working area. Always let the product come to complete
stop before putting it down.
6. Do not overwork yourself. Take regular breaks to ensure you can concentrate
on the work and have full control over the product.
Function selection ring
Three working modes are available on this tool: drilling, screw driving and impact
drilling. To select any of the three modes, rotate the function selection ring(14),
to align the arrow with icon of the drill/screw/ hammer on the housing. (Fig. 7).
Fig. 7
MNL_18V 2X 2AH Li-ION BRUSHED COMBI DRILL_V2_211220.indd 25
12/20/21 11:39 AM
