Fig. 16
Warning: Risk of injury!
The product must be mounted in a stable position, i.e. on
a workbench, a universal subframe or similar.
Warning: Risk of injury!
As soon as a malfunction occurs, push the red 0-Button on the
On/Off Switch and pull out the mains plug.
Warning: Risk of injury!
The defect may be put into operation only if no defects or errors
are found. Ensure that any defective parts are replaced before
the product is used again.
TTB903TCH
by
TITAN
Before you start
Getting
started...
20
Check before starting!
Check the safe condition of the product before plugging the power cable:
> Check whether there are any visible defects or faults.
> Check whether all parts of the product are firmly attached.
> Check that the safety devices are in faultless condition.
> Check that the cutting disc can run freely.
> Check there is sufficient cooling water in the product.
9
33
EN
Summary of Contents for TTB903TCH
Page 39: ......
