Warning:
The vibration emission value during actual use of the power tool can
differ from the declared value depending on the ways in which the tool is used
dependant on the following examples and other variations on how the tool is used:
How the tool is used and the materials being drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately
managed
Warning:
identify safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is switched off and when it is running
idle in addition to the trigger time).Note The use of other tools will reduce the users’ total
working period on this tool.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp drill bits.
Maintain this tool in accordance with these instructions and keep well lubricated (where
appropriate)
Avoid using tools in temperatures of 10°C or less
Plan your work schedule to spread any high vibration tool use across a number of days.
Health Surveillance
All employees should be part of an employer’s health surveillance scheme to help identity
any vibration related diseases at an early stage, prevent disease progression and help
employees stay in work.
Double insulation:
The tool is double insulated. This means that all the external metal parts are electrically
insulated from the mains power supply. This is done by placing insulation barriers between
the electrical and mechanical components making it unnecessary for the tool to be earthed.
Important note:
Be sure the supply is the same as the voltage given on the rating plate. The tool is fitted with
a two-core cable and plug.
Remove the mains plug from socket before carrying out any adjustment or servicing.
SÍMBOLOS
Para reducir el riesgo de lesiones, el usuario debe leer el manual de
instrucciones
Advertencia
Los productos eléctricos estropeados no deberían desecharse con la basura
común. Por favor, recíclelos si cuenta con instalaciones indicadas para ello.
Póngase en contacto con sus autoridades locales o su distribuidor para obtener
consejos acerca del reciclaje.
Use protectores para los oídos
Use gafas protectoras
Use máscara anti-polvo
Doble aislamiento
Declaración de conformidad
SYMBOLES
MISE EN GARDE - Pour réduire le risque de blessures, l’utilisateur doit lire le manuel
d’instructions.
Avertissement
Ce produit est marqué du symbole du tri sélectif relatif aux déchets d’équipements
électriques et électroniques. Cela signifie que ce produit ne doit pas être mis au rebut
avec les déchets ménagers mais doit être pris en charge par un système de collecte
sélective conformément à la directive européenne 2002/96/CE. Il sera ensuite soit
recyclé soit démantelé afin de réduire les impacts sur l’environnement, les produits
électriques et électroniques étant potentiellement dangereux pour l’environnement et
la santé humaine en raison de la présence de substances dangereuses.
Pour plus de renseignements, vous pouvez contacter votre administration locale ou
régionale.
Porter toujours des protecteurs d’oreilles
Porter toujours des lunettes de protection
Porter toujours un masque anti-poussières
Double isolation
Conformité aux normes européennes
