TITAN INDUSTRIAL shall not be responsible for any consequences resulting from improper use of
this equipment. The operator is required to read the entire contents of this manual before attempt-
ing to operate the unit. If the operator does not completely understand the instructions and all of the
hazards of operating this unit after reading this manual, he/she must call the factory at 1-800-845-4141
to answer these questions to his/her complete satisfaction before proceeding.
READ AND COMPLETELY UNDERSTAND
entire contents of this Owner’s Manual and become familiar with
the unit before attempting to start using this equipment! It is your responsibility to know its applications,
limitations, and hazards! Call the factory at 1-800-845-4141 with any questions.
FOR OUTDOOR USE ONLY!
Never use this unit inside any enclosure including
the generator compartment of a recreation vehicle (RV) or inside any building. No
modifications will eliminate the danger of possible carbon monoxide poisoning,
fire, or explosion.
TWO (2) FEET OF CLEARANCE
on all sides is required even while using outdoors.
This unit is sold solely for the purpose of portable power. Other applications could void warranty.
User accepts responsibility for injuries and/or damage resulting from other applications.
IMPORTANT !
READ FIRST
OWNER’S
MANUAL
MODEL TG 9000ES
Industrial Generator
2
DESCRIPTION
THE TITAN INDUSTRIAL INC. MODEL TG 9000ES
is a
gas engine driven, revolving field, alternating current (AC)
generator designed to supply electrical power for com-
patible electrical tools, motors, appliances, and lighting
(see wattage reference guide on page 9).
The Model TG 9000ES operates at 120 volt and/or 240
volt, single phase, 60 Hz and will operate devices that
require up to 7200 watts continuous and 8400watts surge.
CAUTION!
Do not tamper with engine governed speed.
The TITAN INDUSTRIAL GENERATOR supplies cor-
rect rated frequency and voltage when running at the
proper governed speed. Incorrect frequency and/or volt-
age could damage connected electrical devices.
It is required by The National Electrical Code to have
the frame and all external conductive parts of the gen-
erator connected to an earth ground. Proper grounding
also satisfies most local electrical codes.
Connect a No. 12 AWG standard copper wire to the
Grounding Lug Block (See Figure 1). The grounding
lug can be found on the control panel. Connect the other
end of the wire to an earth driven copper or brass ground-
ing rod (electrode).
CAUTION!
Do not connect ground to a preexisting
ground rod, water pipe, or building frame.
Consult with a licensed electrician in your area because
local codes vary. Properly grounding the generator helps
prevent electrical shock if a ground fault condition exists
in the generator or in connected electrical devices. This
will also help to dissipate static electricity resulting from
ungrounded devices.
GROUNDING THE GENERATOR
Figure #1 - Grounding Lug Block
