TA 250 / TA 450
(0001)
49
/
112
8. Settings
The
setting only works when being enabled!
(press push-button 1 for a moment / LED signal lamp must be bright)
8.1. Operating modes
The
TA 250/TA 450 can be operated
in
three different operating modes
:
Automatic
Semi-automatic
Manual
Press and hold
the
SET button for 3 seconds
to choose
one of the operating modes.
The operating mode which is set starts flashing.
Afterwards press one operating mode button of your
choice.
When you release the operating mode button you choose,
the LED will stop blinking after about 3 seconds and the
mode you set will be stored.
8.2. Tensioning force / welding time
Press and hold the adjust button for 3 seconds to adjust
the tensioning force or welding time
until the number above
the adjust button flashes.
Now you can
adjust
the desired
tensioning force / welding
time by pushing the adjust button repeatedly until
the
desired value is displayed
.
1 = low tensioning force / welding time
9 = high tensioning force / welding time
When you release the adjust button the set value will stop
blinking after about three seconds and the value you set will be
stored.
Welding time
Tensioning
force
H TA 250 / 450 EU 09/15
Summary of Contents for TA 250
