© Titan Tool Inc. All rights reserved.
7
volume Pumped Screen
VOLUME PUMPED
SELECT-4
MENU-1
The Volume Pumped screen shows the
total number of gallons or liters sprayed by
the sprayer.
GALLONS XXXXXX
PRESS 1 FOR MENU
To select the Volume Pumped screen, press
the #4 key.
Job volume Screen
JOB VOLUME
SELECT-4
MENU-1
The Job Volume screen allows the user to
reset a gallon counter to track usage on
specific jobs.
JOB GALLONS
XXXX
MENU-1
RESET-3
To select the Job Volume screen, press the
#4 key.
Unit Serial # Screen
UNIT SERIAL #
SELECT-4
MENU-1
The Unit Serial # screen shows the sprayers
serial number.
SER # XXXXXXXXXX
PRESS 1 FOR MENU
To select the Unit Serial # screen, press the
#4 key.
Timers Screen
TIMERS
SELECT-4
MENU-1
The Timers screen shows the total time the
sprayer has been turned on as well as the
total time the sprayer has been running (pumping).
ON TIME XXXXX:XX
RUN TIME XXXX:XX
To select the Timers screen, press the #4
key.
Job Timers Screen
JOB TIMERS
SELECT-4
MENU-1
The Job Timers screen allows the user to
reset the “ON TIME” and “RUN TIME” to
track time on specific jobs.
ON TIME XXXXX:XX
RUN TIME XXXX:XX
To select the Job TImers screen, press the
#4 key. The screen will toggle between the
timers and a screen that allows the user to reset the timers.
Service Time Screen
SERVICE TIME
SELECT-4
MENU-1
The Job Volume screen allows the user to
reset a gallon counter to track usage on
specific jobs.
The Service Time screen allows the user to set a service time interval
(in hours). Below the set time, the screens shows the current amount
of hours on the sprayer. To select the Service Timer screen, press the
#4 key.
SERVICE @ XXXHR
RUN HOURS XX
The screen will toggle between the service
hours and a screen that allows the user to
change the service time interval.
When the service time interval is set and met by the run hours,
the display will toggle between the “Main screen” and a “Service
Required” screen at sprayer startup. To stop the toggling, scroll to
the “Service Time” screen and either set a new service time interval or
set the service time to “0”.
Pressure Screen
PRESSURE
SELECT-4
MENU-1
The Pressure screen allows the user to see
the current set point pressure as well as the
actual working pressure.
SET PSI
3000
ACTUAL PSI
2950
To select the Pressure screen, press the #4
key. This screen is also the Main Screen.
Security code Screen
SECURITY CODE
SELECT-4
MENU-1
The Security Code screen allows the user
to set a four digit security code to prevent
unauthorized use of the sprayer. If a security code has been set, the
control system display will ask for the code at startup. If the correct
code is entered, the display will show the Main Screen and the
sprayer will operate. If the wrong code is entered, the display will
continue to ask for the correct code and the sprayer will be disabled.
To set or change the security code, press the #2 key.
NOTE: If the sprayer is new, no security code is set and
the main Screen will appear at startup. Also, when
setting a security code for the first time, the “Enter
Old code Number” screen will not appear.
ENTER OLD CODE
NUMBER
Enter the old security code number to
access the screen that allows the code
change. If the wrong code is entered, the display will continue to ask
for the correct code and the security code cannot be changed.
ENTER NEW CODE
NUMBER
Enter the new security code. Once the
new code is entered, the display will
automatically ask that the new code be re-entered for verification. If
the same new code is re-entered, the display will confirm that the new
code has been accepted and return to the Main Screen. If the new
code is re-entered incorrectly, the display will return to the “Enter New
Code Number” screen and the process will repeat.
NOTE: To inactivate the X-Lock security function, enter
“1111” at the “Enter New code Number” screen
(this is the default code that leaves the sprayer
unlocked). As a result, the main Screen will appear
at sprayer startup.
Prime Screen
PRIME
The Prime screen appears when the
pressure control knob is set at the “Min”
setting in the yellow zone.
Pulse clean Screen
PULSE CLEAN
ACTUAL PSI
XXXX
The Pulse Clean screen appears when the
pressure control knob is set at the PULSE
CLEAN position in the red zone and the PRIME/SPRAY valve is in the
PRIME position.
NOTE: If there is no action at any menu screen for 30
seconds, the display will go back to the main Screen.
