Operating the tool
H 221 GB 22/06
With the left hand hold the upper and lower run of the strap
together. Both straps must be placed exactly on top of one
another. Grip and press lifting lever
item
28
together with
the cutting lever
item 17
with the right hand. Insert the steel
strap laterally until it strikes against the case wall, ensuring
that the lower run of strap projects slightly out of the tool at
the front. The right hand now releases the levers
item
28
and
item 17
which have been pressed together. If
necessary, tighten the great strap by hand.
Loop: The left hand pulls the strap loop, the right hand
grasps the lifting lever
item 28.
Place steel strap from above around the package.
Pull through the strap end until it is in the center of the
package beneath the upper run of strap and juts out approx.
15 cm.
The right hand grasps the tension lever
item 45
and moves
it back and forth to obtain the desired strap tension. At the
same time the left hand holds the cutting lever
item17
.
After having achieved the desired strap tension bring
tension lever
item 45
back into its initial position. The right
hand remains there and provides support for the joining
process. The sealless joint is formed by pushing the cutting
lever
item 17
forwards rapidly with the left hand until it
strikes against the case; the steel strap is simultaneously
cut off directly behind the joint.
Bring tension lever
item 45
back into its initial position.
Grasp and press together lifting lever
item
28
with cutting
lever
item
17
. Withdraw the tool from the package by a
rotary movement to the right side
,
keep the cut off strap
end in your left hand.
Summary of Contents for L 221-0001
Page 16: ......
