39
TTB776VAC by
TITAN
In
more
detail ...
Problem
Possible Cause
Solution
4. Unsatisfactory
result
4.1. Attachment not suitable
for working surface
4.1. Use proper attachment
4.2. Dust bag is full
4.2. Replace with a new dust
bag
4.3. Dust bag is damaged
4.3. Replace with a new dust
bag
4.4. Cartridge filter damaged
4.4. Replace with a new
cartridge filter
4.5. Attachment / extension
tube(s) / hose not
properly connected
4.5. Check and reconnect the
involved part(s)
4.6. Attachment / extension
tube(s) / hose / handle /
air inlet blocked
4.6. Remove the blockage(s)
(see section Removing
blockage)
4.7. Attachment / extension
tube(s) / hose / handle /
air inlet defective
4.7. Replace involved part
with a new one
5. Dust not being
retained in the
vacuum (dry
vacuuming
configuration)
5.1. Worn dust bag / cartridge
filter
5.1. Replace with a new
suitable part
5.2. Dust bag / cartridge filter
not properly attached
5.2. Check and re-attach
properly
5.3. Defective attachment /
extension tube / hose /
handle / air inlet
5.3. Replace involved part
with a new suitable one
6. Excessive
vibration or
noise
6.1. Attachment / extension
tube(s) / hose not
properly connected
6.1. Check and re-connect
6.2. Loose screws/bolts/nuts
on handle or wheels
6.2. Tighten screws/bolts/
nuts
Troubleshooting / Recylcling and disposal
Recycling and disposal
WEEE symbol. Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check with your
Local Authority or local store for recycling advice.
The product comes in a package that protects it against damage during
shipping. Keep the package until you are sure that all parts have been
delivered and the product is working properly. Recycle the package
afterwards.
