19
TTB776VAC by
TITAN
Getting
Started ...
Before you start
> Align and slide the rear wheels (5) onto the supports. The rear wheels and the
vacuum base are marked with the numbers 1 and 2. Insert wheel 1 into slot 1
on the back of the vacuum; insert wheel 2 into slot 2 on the back of the vacuum.
Secure the connection with the screws (5a), using a suitable crosshead
screwdriver (Fig. 3 & 4).
> Turn the assembled main body with the castors (7) and rear wheels (5) right way
up and place it on a flat, stable surface. Ensure that castors rotate smoothly.
Product configurations
This product is designed for dry and wet vacuuming as well as blowing. Assemble
the accessories and attachments according to the desired operation.
NOTE:
Always use the product:
– with cartridge filter (23) and dust bag (24) assembled for dry
vacuuming and blowing (Fig. 5)
– with foam sleeve (22) for wet vacuuming (Fig. 6).
4
5a
5
2.
1.
Fig. 3
Fig. 4
