Titan 5052931645213, Manual

Page: 11 / 36

ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR TOOLS
WARNING:
Do not operate the scroll saw until it is assembled, and you
have read and understood the following instructions and the warning labels
on the scroll saw.
Before operating
> Check for proper assembly and proper alignment of moving parts. Understand
the function and proper use of the ON/OFF switch.
> Understand the function and proper use of the ON/OFF switch.
> Know the condition of the scroll saw. If any part is missing, bent, or does not
operate properly, replace the component before you use the scroll saw.
> Determine the type of work you are going to be doing. Properly protect your
body including your eyes, hands, face, and ears.
> To avoid injury caused by pieces thrown from accessories, use only
recommended accessories designed for this saw. Follow the instructions
supplied with the accessory. The use of improper accessories may cause
risk of injury.
> To avoid contact with rotating equipment:
• Do not position your fingers where they could contact the blade if the
workpiece should unexpectedly shift or your hand should slip.
• Do not cut a workpiece too small to be held safely.
• Do not reach under the scroll saw table when the motor is running.
•
Do not wear loose clothing or jewelry. Roll long sleeves above the elbow.
Tie back long hair.
> To avoid injury from accidental starting of the scroll saw:
• Make sure the switch is OFF and unplug the power cord from the electric
outlet before changing the blade, performing maintenance or making
adjustments.
• Make sure the switch is OFF before plugging in the power cord to an electric
outlet.
> To avoid injury from a fire hazard, do not operate the scroll saw near flammable
liquids, vapors or gases.
> To avoid back injury:
• Obtain help when it is necessary to raise the scroll saw more than 10 inches.
Bend your knees when lifting the scroll saw.
> Carry the scroll saw by its base. Do not move the scroll saw by pulling on the
powercord. Pulling on the power cord could cause damage to the insulation
or the wire connections resulting in electric shock or fire.
Technical and legal
information
Getting
started...
GB
11
IE
TTB703SSW by TITAN