7
ASSEMBLY
1. Insert the wheel axle into the holes
of the mount bracket. Slide the
wheels onto the axle and secure
with Ø2x20 split pins from outside.
Attach the wheel caps.
2.
Keeping the support stand against
the wedge, remove the R-Pin and
bolt to release cylinder. Lower both
control handles to raise the wedge
ram to the top. Insert the bolt and
R-Pin to secure the cylinder.
2
3
4
1
Ø2x20
×
2
A
3.
Release both control handles to
retract the wedge ram. Remove the
support stand.
4. Align the hole and locking pin of the
guard arm with the mount bracket.
Secure the guard arm with a M10
×
30
hex
bolt, a washer and a nut from the
hardware bag.
M10
×
30
×
1
B
Summary of Contents for TPLS11TV
Page 14: ...14 PARTS SCHEMATIC...
