Titan Pro TPLS11TV, Operator'S Manual

Page: 6 / 17

6
1. Log Splitter Frame & Power Station
2. Guard Arm
3. Log Lift
4. Retaining Hook
1
2
3
4
6
9
5
7
8
5. Wheel
6. Wheel Axle
7. Support Wheel
8. Operator's Manual
9. Hardware Bag, including
CONTENTS SUPPLIED
Ø2x20 × 2
A
M10 × 30 × 1
B
M10 × 30 × 2
C
M16 × 90 × 1
D
APPLICATION CONDITIONS
This log splitter is designed for operation
under ambient temperatures between +5°C
and 40°C and for installation at altitudes no
more than 1000m above M.S.L. The
surrounding humidity should less than 50% at
40°C. It can be stored or transported under
ambient temperatures between -25°C and 55°
C.
ELECTRICAL REQUIREMENTS
With a 230 Volt / 50Hz motor, the log
splitter should be connected to standard
230V±10% /50Hz±1%.
Electrical supply which has protection devices
of under-voltage, over-voltage, over-current (16
A) as well as a residual current device (RCD)
which maximum residual current rated at 0.03A.
Electrical connection rubber cables must comply
with EN60245 which are always marked with
symbol H 07 RN. Cables should be identified, as
it is a legal requirement.
If machine installs BSI approved plug or SEV
approved plug, the degree of protection of the
plug and socket combination should be IP44 at
least.