18
8.2.3 OPERATION AND WEAR CHECKS
8.2.4 LIFT STABILITY
8.3 CLEANING
1. Examine lift for structural cracks, bends, or other signs of damage prior to each use. Do
not use this product if worn or damaged.
2. Check that the safety locking mechanism is functioning correctly.
3. Check that the safety lock is audibly and visibly operating correctly.
4. Check the floor for stress cracks near the anchor bolts.
1. Every six months check the nuts of all bolts for correct installation torque.
2. Re-tighten them as required.
NOTE: DO NOT USE AN IMPACT WRENCH.
DANGER: DO NOT USE HIGH PRESSURE / STEAM JET CLEANERS OR
CAUSTIC CLEANING AGENTS.
1. Periodically wash off aggressive substances and treat the lift with oil or wax spray.
2. Repair the damage to the paintwork immediately to prevent corrosion.
Summary of Contents for HD2P-9KCL
