Activate the touch screen by pressing
for less than 2 seconds on
P2
.
… then touch
to see the new watch
face…
… then
to keep it or
to reject
it.
Touch screen
activation
P2
www.tissot.ch
11/19
119_E / 06-04
Selecting a watch face
Activate the touch screen by pressing
for less than 2 seconds on
P2
.
Thanks to its matrix screen, your High-T
®
can
display the time in various ways: in the manner of a
conventional analogue watch or a digital watch with
various graphics, as illustrated opposite.
From the time display, touch
and
to choose your preferred watch
face.
+
P1
–
P3
You can also use push buttons
P1
and
P3
to scroll the various watch faces.
Selecting the "Face" (watch face) display mode
Receiving a new watch face
Thanks to the MSN
®
Direct services, you can receive
new watch faces. When a new watch face is received,
your High-T
®
displays the messages indicated in the
following screens.
Please note:
To receive new watch faces, you must
add the "
Watch faces"
channel to the active service on
your watch.
You can store only one downloaded face at a time;
when you upload a new watch face, the previous one
is erased. On the other hand, all the original faces are
preserved.
The radio signal used to convey information also
enables your watch to be synchronized with a
reference clock. Your High-T
®
thus constantly shows
the precise time, wherever you are (provided that you
are in an area covered by the radio signal). However, it
is possible to set the time by hand, in accordance with
the procedure described in the "
Settings
" section, on
page 15.
Downloading watch faces
Time setting (Set time)
Touch screen
activation
P2
Summary of Contents for HIGH T
Page 1: ...USER S MANUAL ...