Tissot HIGH T, User Manual

Page: 8 / 19

www.tissot.ch
8/19 119_E / 06-04
PRECAUTIONS FOR CHARGING
Make sure to insert the plug carefully in your High-T
®
!
CHARGING VIA WALL SOCKET
CHARGING VIA PC CABLE
POINTS TO BE CONSIDERED
To recharge your watch, simply connect the mains
adapter to a wall socket and insert the plug in the
slot situated on the underside of your watch.
The display indicates that charging is in progress
and, when the storage battery has been suitably
recharged, charging stops automatically. The time
required for complete recharging is approximately
two and a half hours. During recharging, your watch
receives and displays the information.
You can use the PC cable to recharge your watch via
the USB port of your computer. However, this cable
has no USB functionality and does not permit data
interchange with your PC.
Prefer a single USB connection (avoid using a
USB hub).
Charging via the USB port may not work,
in particular if:
The USB port is not activated (BIOS settings,
Windows version);
The PC is in energy saving mode or is not
turned on;
The current delivered is not sufficient
(especially for use with a USB hub).
Place your High-T
®
on a flat surface, with the
display downward, then bring the plug horizontally
opposite the opening in the back of the watch and
insert it in the charging slot.
If you do not use your High-T
®
for a long period
of time, we nevertheless advise you to recharge
it regularly so as to avoid damaging the storage
battery.
It is strongly recommended not to perform
recharging of your watch at temperatures below
10°C or above 40°C.
Please also become acquainted with the safety
notes on page 3.