ACS
Annex D.1
(
mandatory
)
Wiring d
iagram of the turnstile connection to access control system
(
ACS
)
in pulse mode
Relay
1
Relay
2
Door contact
1
Door contact
2
Figure D.1 – Wiring diagram of the turnstile connection to ACS
inp1- "PANIC"
inp2- "TO BE OPENED A" in pulse mode. When command is issued entry is activated for 5 sec.
inp3- " TO BE OPENED B" in pulse mode. When command is issued entry is activated for 5 sec.
inp4- "TO BE OPENED A". Entry is activated for the time of keeping in active state
inp5- " TO BE OPENED B". Entry is activated for the time of keeping in active state
GND- "-" of power supply (common wire)
out3 - "DETECTION OF ACCESS A"
out4 - "DETECTION OF ACCESS B"
Signal is generated by controller when rotor is rotating
from 64o to 120o in the relevant direction
