Settings
42
Note:
During a call, the volume of the receiver is adjusted using
the rocker switch with the
+
and
–
symbol on the left of
the device. This change will then be automatically saved.
Alert type
Here you set whether your telephone will only ring, only vibrate, first
vibrate and then ring, or ring and vibrate at the same time.
Ring type
Here you can set whether, for incoming calls, your telephone will play
the ringtone just once, or repeatedly, or ascending (starting quietly
and getting louder).
Answer mode
Here you can specify that incoming calls can be taken not only with
the dial key
, but with any key you want.
Speed dial
Here you can assign the speed dial numbers to the numerals
to
.
When you press the key concerned for about 2 seconds, the number
of the contact selected here is dialled. Under "Set number", for each
numeral you can select a contact who is dialled when you keep the
key pressed down. Under "Status" you switch the speed dial function
on and off.
Talking keys
Here you switch the "Talking keys" on and off. If they are switched on,
the telephone speaks the numbers
to
when they are pressed, for
verification purposes.
