Messaging (SMS)
22
Sending SMS
When the SMS text has all been entered, press the dial key
and
select "Send to".
You are given a choice by which you can either enter a number man-
ually or add the recipient from your phonebook.
Hint:
If you want to send the same SMS to more than one recip-
ient, you can enter more than one number, one after the
other, or add them from your contacts. The SMS is then
sent to all the selected recipients.
When you have selected the message's recipients, press the dial key
and then select "Send". The message is then sent to the recipi-
ent/s.
Apart from Send, the selection menu also enables you to edit or de-
lete a recipient, remove all recipients or save the message as a draft.
Note:
If you want to save a message as a draft, it is not sent, but
just saved as a draft. You can open the message under
Drafts in the SMS menu, change the text again, and then
send it.
SMS settings
In the main menu
Messaging you can make settings not only for
writing messages but also for your incoming mail and for drafts.
SMS server
This is where you enter the number of your service provider's SMS
service. You can enter up to two numbers for sending SMS and ena-
ble the profile to be used. You do not usually need to make any set-
