tiptel IP 28xs Getting Started
- 4 -
3)
Connect Network and Power
There are two ways for network and power source connections. You can either connect the phone
to the AC Power directly using the power adapter or to a PoE compliant switch or hub. Your
system administrator will advise you on which one to use.
Note:
1.
If inline power is provided, do not install AC adapter. Make sure the Ethernet cable and
switch/hub are PoE compliant.
2.
The Internet Port can be also connected to Hub/Switch/IP PBX or other internet devices.
Configuration and Registration
If you are administrator, you need to do some simple configuration to make the phone work. If not,
please contact with your internet administrator or service provider for more details.
Network Configuration
The network information can be set and check by the phone operations:
1) Network configuration
1. DHCP:
Pick up the han
dset and dial “**88#”, after hearing the prompt “Please enter the value after
beeping
”, please input “1#” to enable DHCP or “0#” to disable DHCP, you will hear prompts
“Please hang up and wait for rebooting or continue setting after the tone” to indicate that the
configuration is successful.. Input other characters or numbers without #, for example input 222,
you will hear
prompts “Invalid setting, please re-enter after the tone” to indicate that the
configuration is failed.
Summary of Contents for 28XS
Page 1: ...11 2010 Versie 1...
