Simply IP Phone Using the Basic Phone Functions
- 16 -
No Answer:
Incoming calls are forwarded when the phone is not answered after a
specific ring times.
To configure Call Forward via Web interface:
Choose Phone->Features->Forward to do the relating changes. Please refer the above
configuration information.
During an Active Call
Mute
This function allows you to mute the microphone of the active audio device during a call; you
cannot be heard by the other party. You can still hear all other parties while mute is enabled.
To mute/resume the conversation:
Press the
button during a conversation to mute the call, and press it again to get the
microphone return to normal conversation.
Call Hold
This call function allows you to place an active call on hold. In this case your IP PBX might play a
melody or message to the other party while waiting. Other calls can be received and made while
having a call on hold.
To hold/resume a call:
1)
Press the HOLD button to put your active call on hold.
2)
During the call, there will be a "dudu.." sound for each 30 second, suggesting that there is a
call in Hold state.
3)
If there is only one call on hold, press the HOLD button again to retrieve the call.
4)
If there are two calls, it can only be one call on hold, press the hold button to switch between
the two calls.
Note:
When you are under the call hold status, putting down the handset, the conversation will not be
hung up, the indication LED will prompt that the conversation is still in progress. Pick up the
handset; it will resume the call automatically.
Call Waiting
This call feature allows your phone to accept other incoming calls to the extension no matter under
which circumstances.
To enable/disable Call Waiting via Web interface:
Choose Phone->Feature->Call Waiting to do the relating changes.
Summary of Contents for 28XS
Page 1: ...11 2010 Versie 1...