EN
22
Pre-filter
Dust Sensor
Ensure the appliance is switched off
before cleaning, and remove the dirty
pre-filter from the mesh filter-holder.
Run the appliance in MAX mode, and
rotate the side cover to clean the dirty
pre-filter.
To avoid dust accumulation which can affect
cleaning performance, wipe the suction
mouth with a damp cloth.
Replace a clean filter to the main body. Put
the dirty pre-filter into the cleaning tool and
connect the cleaning tool to the main body.
After cleaning, insert the clean pre-filter into
mesh filter properly and it clicks into place.
Install the clean filters and dustbin back into
the main body, then close the dustbin flap.
①
②
③
④
