EN
14
Discover More
Work with Alexa
Connect your devices to Alexa and you can give voice commands to check work status, obtain a
cleaning report, etc.
Built-in Bluetooth Speaker (for PURE ONE S12V Plus)
With successful pairing, the Bluetooth speaker can play audio from your phone.
1. Pull the trigger to activate Bluetooth on the appliance.
2. Enable Bluetooth on your phone and select
“Tineco_XXXX” from the device list.
Note:
• If the device is not used for 30 minutes or more, Bluetooth
will automatically disconnect.
MAX AUTO
Voice Prompt (for PURE ONE S12V Plus)
The appliance can report the work status in real time.
List of voice prompt
“Power on”
“Please clean the pre-filter” (when WiFi connected)
“Auto mode”
“Please clean the dustbin” (when WiFi connected)
“Max mode”
“Dust sensor malfunction”
“WiFi connected”
“Brush roller tangled”
“Bluetooth enabled”
“Air channel blocked, please remove
blockages and clean the filters.”
“Bluetooth connected”
“Voice prompts on”
“Bluetooth disconnected”
“Voice prompts off”
“Low battery, please charge”
“Charging”
• Press to disable voice prompts when the indicator is illuminated. Press again to turn the
voice prompts on.
