© TIMYO B.V.
TIMYO USER MANUAL EN SKO52021V2
PAGE 59
MANUAL
VANDIJCK
E-BIKES
VD0.1
5.8.25 Magnet Quantity Settings
“n”
represents magnet numbers of PAS disk. The default value
is 6. Press the " " or " " to select the amount to change magnet numbers of
PAS disc. Press and hold " " for 2s to confirm and return to the previous menu.
5.8.26 Speed sensor settings (optional)
"SPS"
stands for speed sensor settings. The default value is 1 Press the " " or
" " to select the amount of magnetic heads (the range is from 1 to 15). Hold
" " for 2s to confirm and then return to the previous menu.
5.8.27 Gear functions (optional)
"HL"
stands for throttle push-assist function. HL-N means that the push function
for throttle is disabled. HL-y means that the push function of the throttle assistant
is enabled. The default value is N. Press the " " or " " button to select Y or
N to set the push-assist functions of the throttle. Hold " " for 2s to confirm
and then return to the previous menu. Otherwise you want to select N and then
access the throttle pedal level setting to switch it on or off
5.8.28 Gear level on/off
"HF-y"
means that the gas velocity is limited by the current PAS level, while
"HF-
n"
means that the gas velocity is not restricted by the current PAS level. The
default value is n. If you select y, the maximum speed can only be the highest
speed driven by the current PAS level when you turn the throttle. If you select n,
the maximum speed is not limited by the current PAS level shown on the display
and you reach the nominal maximum speed immediately when you twist the
accelerator pedal. Press " " or " " to set Y or N and press " " to confirm
and return to the enable/disable setting interface or hold " " for 2s to return
to the previous menu interface.
5.8.29 Battery power delay settings
"DLY"
stands for delay time of the battery. The default value is 3s. Press button
" " or " " to select delay time 3s,6s,12s to change the settings. Press " " to
confirm and then access the maximum speed limit settings.
5.8.30 Maximum speed limit settings
"MAX SPD"
stands for maximum speed limit settings. The default value is 25 Km/h.
Press " " or " " to set the maximum speed from 12 km/h to 25 km/h. Press
" " to confirm and then access push-assist settings.
The maximum speed is set by the display manufacturer.
!
